GST-9 Pistol Frame | 80% Arms GST-9 Pistol Build Kit | Daniels Defense AR-15 | 5D Tactical Router Jig Pro | AR-15 80% Lower Billet | Eugene Stoner AR-15 | 9mm AR-9 80% Lower Receiver | Adams Arms AR-15

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

GST-9 Pistol Frame | 80% Arms GST-9 Pistol Build Kit | Daniels Defense AR-15 | 5D Tactical Router Jig Pro | AR-15 80% Lower Billet | Eugene Stoner AR-15 | 9mm AR-9 80% Lower Receiver | Adams Arms AR-15

gst-9-pistol-frame
GST-9 Pistol Frame

The GST-9 V1 became a standard for the market for 80% frames when it was first released in November 2019. It offered a modular grip system while still being compatible with Gen 3 G19 parts. With the new GST-9 MOD1 frame, we've lifted the bar once again after three years of customer input and thousands of rounds fired!

For improved controls throughout the recoil cycle, the gas pedal's shape and placement were altered. When building out your frame, the grip system was overhauled to ensure a flush fit with grip modules. Last but not least, to substantially facilitate construction, the rear rails were divided into a 2-piece system.

FEATURES:

 A modular frame allows you to use a single 4-in-1 platform to hold weapon systems that are 19, 19X, 19L, and 17 sizes.

Compatible with aftermarket parts, holsters, and accessories for the Glock 19 third generation.
 Only the GST-9 is the first and sole 80% lower that works with Glock holsters.

An undercut trigger guard, a high beavertail, a glove bevel, a scalloped magazine release, no finger grooves, and typical 45-degree gas pedals are among the ergonomic characteristics.

Extend internal rails three times with premium stainless steel components.
easily delivered to your door and finished in a few minutes

Calibers - can support 9mm (G19),.40cal (G23), and.357 Sig (G32) bullets.

We are unable to legally provide the jig or frame rails with the MOD1 frame due to ATF rules. It is necessary to buy the jig and MOD1 frame separately. A single set of MOD1 frame rails is included with each jig. For each MOD1 frame you intend to make, you must buy a jig. Only the jig comes with frame rails; the 80% lower is not included.



What is the GST-9 frame compatible with?

The GST-9 frame is a modular polymer 80% pistol frame system compatible with Glock® 19 Gen 1-3 platform components. It is the world’s first truly modular polymer 80% pistol frame system. The GST-9 frame accepts any Gen 1-3 Glock 19 components, accessories, and holsters. This makes the GST-9 the first and only 80% lower that fits in standard Glock holsters.


What is the price of GST-9?

According to American Handgunner, the GST-9 pistol kit, including the frame, grip extension, completed RMR-cut slide, GLOCK OEM parts kit and Lone Wolf AlphaWolf fluted barrel can be purchased for $799.
You can as well get it from 5dtacticalsellers.com at $599 saving up to $200!


Will a GST-9 fit in a Glock 19 holster?

According to GunsAmerica Digest, the GST-9 frame accepts any Gen 1-3 Glock 19 components, accessories, and holsters. This makes the GST-9 the first and only 80% lower that fits in standard Glock holsters¹. So it should fit in a Glock 19 holster.

What parts do you need for GST-9?

According to 80% Arms, every GST-9 Pistol comes with the GST-9 Modular Frame, GST-9 Grip Extension - Full Size, The Wraith RMR Cut Slide - Completed Black, Straight-Fluted, Match-Grade G19 Barrel and GST9 Lower Parts Kit.

What magazine does the GST-9 use?

According to 80% Arms, the GST-9 is compatible with both Glock® 17 and Glock® 19 magazines. You can conveniently order these magazines from the comfort of your home by visiting 5dtacticalsellers.com, your number One Online Store for Firearm Accessories.

Why is my GST-9 slide not locking back?

There could be several reasons why your GST-9 slide is not locking back. One reason could be that the slide stop is not engaging the slide lock notch on the slide. Another reason could be that the magazine follower is not pushing up on the slide stop.

You can try to check if the slide stop is functioning properly and if the magazine follower is
 pushing up on the slide stop. If you are still having issues, you may want to contact 5D Tactical Sellers support for further assistance.
Reply | Threaded
Open this post in threaded view
|

Re: GST-9 Pistol Frame | 80% Arms GST-9 Pistol Build Kit | Daniels Defense AR-15 | 5D Tactical Router Jig Pro | AR-15 80% Lower Billet | Eugene Stoner AR-15 | 9mm AR-9 80% Lower Receiver | Adams Arms AR-15

christopher1278
Just like the versatile modular platform for the Glock 19, the Glock 17 offers flexibility with compatible aftermarket parts and accessories, making it adaptable for different calibers and needs.
Reply | Threaded
Open this post in threaded view
|

Re: GST-9 Pistol Frame | 80% Arms GST-9 Pistol Build Kit | Daniels Defense AR-15 | 5D Tactical Router Jig Pro | AR-15 80% Lower Billet | Eugene Stoner AR-15 | 9mm AR-9 80% Lower Receiver | Adams Arms AR-15

esa_kahn
In reply to this post by gst-9-pistol-frame
The GST-9 Pistol Frame and 80% Arms GST-9 Pistol Build Kit offer firearm enthusiasts a customizable and modular option for personal builds, similar in spirit to the precision found in Daniels Defense AR-15s. For those working with tools like the 5D Tactical Router Jig Pro to complete an AR-15 80% Lower Billet or a 9mm AR-9 80% Lower Receiver, understanding the legacy of Eugene Stoner’s AR-15 design is essential. Enthusiasts often gather on platforms like the Delta Dynamics Discord to share advice, showcase builds—including Adams Arms AR-15 configurations—and stay updated on the latest in firearm customization.
Reply | Threaded
Open this post in threaded view
|

Re: GST-9 Pistol Frame | 80% Arms GST-9 Pistol Build Kit | Daniels Defense AR-15 | 5D Tactical Router Jig Pro | AR-15 80% Lower Billet | Eugene Stoner AR-15 | 9mm AR-9 80% Lower Receiver | Adams Arms AR-15

zubair_samrah
In reply to this post by gst-9-pistol-frame
The GST-9 pistol frame is a modular, 80% pistol frame designed for Glock-compatible parts, making it a popular choice for firearm enthusiasts interested in custom builds. Its unique design allows for easy assembly and compatibility with various components, offering both flexibility and performance. For those seeking spiritual comfort after a long day at the range, click here to listen Surah Yaseen MP3 by Mishary Alafasy and experience a moment of peace and reflection.
Reply | Threaded
Open this post in threaded view
|

Re: GST-9 Pistol Frame | 80% Arms GST-9 Pistol Build Kit | Daniels Defense AR-15 | 5D Tactical Router Jig Pro | AR-15 80% Lower Billet | Eugene Stoner AR-15 | 9mm AR-9 80% Lower Receiver | Adams Arms AR-15

beenish39840
In reply to this post by gst-9-pistol-frame
The GST-9 pistol frame is a modular, 80% lower frame designed for Glock-style builds, offering customization and versatility for firearm enthusiasts. Its ergonomic design and compatibility with Gen 3 parts make it a popular choice for DIY gunsmithing. While exploring guides and forums about the GST-9 pistol frame, I also stumbled upon communities discussing fun mobile games like Nulls Brawl online, showing how diverse online interests can connect people from all walks of life.